BOARD CARE

Do not let the board sit while wet and do not submerge in water.

To clean, scrub with hot soapy water without submerging, rinse and towel dry.

Our cutting boards are natural wood and it will warp and/or crack if water is allowed to soak into the board. Our board conditioner will help with this.

Never wash the cutting board in the dishwasher. Do not use in the microwave or oven or use as a hot plate.

Use our Hardwood Design House Cutting Board Conditioner and/or mineral oil. If board is used as display only then condition once every 2-3 months. If the board is used regularly then condition after every couple of uses. More or less may be needed depending on how dry the board gets. For best long term care, use conditioner anytime the board is starting to look and feel dry. 

Oil the board completely on all sides and edges every time. Constant one-sided application will let the dry side breathe more than the conditioned side. This can cause warping.

Let dry for a few hours in a rack or on its side standing up. 

Do not use edible type oils for conditioner (olive oil, vegetable, sunflower etc.) as they spoil and get rancid.

UV light will darken all woods. It will also pull the red and purple out of the exotics and turn them brown.  Do not store in direct light or in a very naturally lit room as this will darken the woods rapidly and the exotics will lose their lustre and colour.

It is best to store in a perfectly flat area or standing it up on its side to prevent warping. If left lying flat it is best to have feet on the board so both sides can breathe.